Stenciling

"Where the spirit does not work with the hand there is no art."

- Leonardo da Vinci

ValFrania.com
ValFrania.com
ValFrania.com
ValFrania.com
ValFrania.com

How to Stencil

Stenciling isn't difficult once you get the hang of it.

  • I tape down my stencils after placing them. Some use spray adhesive on the back to keep the stencil in place, but then you have to deal with getting the adhesive off the back once done. Taping with cheap painter's tape works fine.
  • Acrylic paint is most often used, but you can use any paint. Just realize you will need to adjust your technique based on the thickness of each paint.
  • If you put on a thin layer of poly first and let it dry completely, you will be able to stencil right over it and wipe off any mistakes you might make.
  • Be sure to offload most of your paint beforehand onto a paper plate or paper towel - it will help prevent bleed under the stencil.
  • Pounce the brush straight up around the stencil rotating your brush to use up all the paint before getting more.
  • Check intermittently by lifting up a corner of the stencil, leaving most of it still taped down.
  • After the paint is dry, you can stencil another image over it or distress with sandpaper.
  • Topcoat when paint is dry.